how to open a wine bottle without a corkscrew – this is how it works: You want to end the evening comfortably with a glass of wine, but you don’t have a corkscrew at hand? No problem, because there are other ways to open the bottle. It works with different tricks.
All you have to do is have an object that fits in the stopper (nails, screws), a hanger and even… a shoe and you’re out of the woods! The quickest way is to push the cork into the bottle if you don’t mind having a little cork in your glass. Otherwise with other methods (knife, pair of scissors), you will not have this problem, because the cork will be extracted.As you can check in Google !!
Table of Contents
8 Methods of how to open a wine bottle without a corkscrew
- Push the cork into the bottle
- Open a bottle with a knife
- Open a bottle with a shoe
- Open a bottle with a screw
- Open a bottle with a hanger
- Open a bottle with paper clips
- Open a bottle with a hammer
- Open a bottle with a pair of scissors
Method 1: Push the cork into the bottle
Step1: Pick up an object with a blunt end.
It should be slightly smaller in diameter than the neck of the bottle. The end of this object must not damage the stopper and must be able to press its entire surface on the stopper in order to insert the latter properly. You can take, for example, a somewhat thick pen, a marker, a stick of lipstick, a metal cylinder, a carabiner, anything as long as it is rigid and of a good diameter.
Stet2: Place your bottle on the ground or on a stable surface.
You can also wedge it between your knees. It can also be placed on a table provided that it is well fixed .
- You can also use a wall. Place your object against the cork, then bring it all against a wall, the object pressing against the wall. Hold the neck with one hand and your object with the other. So, you should get there without hurting yourself. It is absolutely necessary that your wall is safe (a rough concrete wall, for example), otherwise protect your wall with a piece of thick cardboard.
Step3: Press your object against the cork.
A cork stopper is always very slightly sunken compared to the top of the neck. Also, the first thing to do is to succeed in slightly (and carefully!) Depress the button a few millimeters so that your object no longer slips when you press harder.
Step4: Push in the stopper.
In the event that the cork suddenly gives way, be sure to orient the neck of the bottle in a direction where there is no one: it would be a shame to be baptized in Chablis! Hold the neck with one hand and your object with the other, then push firmly until the stopper is fully seated. There is always some liquid spurting out .
- This is a fairly foolproof method, the only downside is that you sometimes end up with little bits of cork in your glass.
- With this method, it is better to take some precautions not to dirty the place where you are and your clothes. Red wine tends to stain heavily. If you have a nice tablecloth or a nice rug, it is better to work in the kitchen, on a tiled floor. As a preventive measure, you can also wrap a clean cloth around the neck.
Method 2: Open a bottle with a knife
Step1: Take a pocket knife or to parry .
The blade of this knife should be thin enough to fit fully into the neck. You can also use a notched blade knife, the grip will be even better.
- As with any sharp tool, great care must be taken not to injure yourself.
Step2: Push the blade into the stopper.
Push it in gently with rocking movements and not pressing too hard so as not to push the stopper down. You must cross the latter.
Step3: Move your knife to remove the cork.
With the blade firmly inserted and secured to the cork, make small movements to the right and left while pulling the cork upwards. You have to go carefully otherwise you will have small pieces of cork in your wine.
Step4: Once out, remove the plug from the side.
Your cork has come out a few millimeters, you will be able to take it from the side. All you have to do is slide the blade diagonally down between the stopper and the neck and pry up the stopper. You have to be very careful, because if the blade is not inserted enough in the cork, it will remove a small piece of the cork and the grip will be less strong. Take your time and lift the cap at different points each time.
- During this operation, you must firmly hold the neck just below the knife blade for better leverage.
Method 3: Open a bottle with a shoe
Step1: Remove the cap from the wine bottle.
With this method, you have to completely remove the overcapping cap, nothing should remain, otherwise the cap will never come out. It may come by itself by pulling it by hand. If there is a zipper, remove it, otherwise cut it with a simple knife with a smooth blade that you will slide flat on the neck
Step2: Place the bottle of wine in the shoe.
Any shoe can work as long as there is not too high a heel (the method does not work with high heels or flip flops). This shoe must also be able to accommodate the base of the bottle. It must be recognized that it will be more of a man’s shoe. For the unblocking operation, you must hold the bottle in one hand and the shoe in the other
Step3: Tap the heel against a wall.
Holding the shoe and the bottle of wine firmly, tap the heel on a hard surface. You have to find the right position so that the stopper comes out little by little. The bottle must absolutely be horizontal and when you strike, only the part of the shoe which is under the bottle must be struck. The shoe is actually only there to act as a shock absorber so as not to break the bottle. With this gesture, the stopper comes out thanks to the pressure exerted by the liquid on the trapped air .
- If you are in the middle of nature, such as on a picnic, you can bang against a tree or a pole. You just must not miss the latter, otherwise the earth will drink Sancerre!
- If you have small feet, instead of a shoe, you can wrap the butt with a thick towel or lean it against a book. You will understand: the shoe is only there to prevent the bottle from shattering!
Step4: Remove the plug.
When the cap is out, you can finish the job by hand. If he doesn’t come, continue your percussion. With a little patience, you should end up tasting this good little wine.
Method 4: Open a bottle with a screw
Step1: Collect a screw and a pair of pliers.
Try to find a screw with the widest possible thread. Take a long screw and since it may come into contact with the wine, it should be clean.
Step2: Insert the screw into the cap.
Screw it in the middle of the stopper so that it only protrudes one to one and a half centimeters. If the cap is not too dense, you should be able to screw it in by hand, otherwise use a screwdriver .
- The maneuver is tricky, because the cork could well fall apart.
Step3: Extract the screw with a pair of pliers.
If the screw is firmly attached to the cap and you pull firmly and gently on the screw, the cap should come with it. If you have one, you can also use the nail puller part of a carpenter’s hammer. As you will have understood, you need a tool that offers more grip than your fingers.
Step4: Remove the screw with a corn cob skewer.
Take one with two small picks and slide it under the head of the screw. The latter is vertical and the skewer is horizontal. Place two fingers under the skewer and on either side of the screw. All you have to do is pull up to release the cork.
- For this to work, of course, the distance between the two peaks must be less than the diameter of the screw head.
Step5: Use a hook or eyebolt to screw.
If you can, grab one of those plastic-coated hooks that hang bikes in a garage. Screw it into the cap. Since there is a somewhat wide handle, use it to remove the cap, you don’t need any other tool.
Method 5: Open a bottle with a hanger
Step1: Unfold an inexpensive hanger.
Obtain a basic hanger made of a single, loosely twisted wire and unfold it.
Step2: Make a small hook at one end.
You will do this with a pair of pliers. Take the last centimeter and bend it at an angle of about 30 °. What you need is a hook that looks like a hook.
Step3: Slide the wire between the stopper and the glass.
You must manage so that the hook does not interfere with you during this phase, the hook will be oriented later. You have to push the wire until the small hook is below the stopper. You must therefore drive your wire in at least five centimeters.
Step4: Rotate your wire 90 °.
Thus, the hook which was hitherto against the glass will be able to pass under the stopper. You understand where we are going with this. Taken from below, the stopper will be able to come out when you exert an upward force. You just have to make sure that the tip of the hook is as close as possible to the center of the stopper so as not to damage it and have maximum efficiency.
Step5: Remove the plug.
Gently pull on your hanger so as not to unfold your hook. Do not hesitate to move it from place so that the cap rises evenly. As the wire snips through the skin, it would be a good idea to put on gloves. The ideal is that the hook can enter the cork and become one with it, the pressure will be all the more effective.
Step6: Use this hanger as a corkscrew.
Instead of going over the side of the neck, you can also pierce the cork with the wire of your hanger, like a corkscrew. By pulling delicately and a little to the side, by friction, you will see the stopper rise.
Method 6: Open a bottle with paper clips
Step1: Collect two paper clips and a pen.
Partially unfold the paper clips, leaving the two “U” shaped parts at each end. In fact, hold both ends in the shape of a “U” in your hand, then open the paperclip. Basically, you open it in the middle.
Step2: Slide one of the paper clips between the cork and the glass.
Slide one of the “U” shaped ends between the glass and the stopper until the hook is under the bottom of the stopper. Rotate your paper clip 90 ° so that the hook rests on the underside of the stopper .
- Do the exact same thing with the second paper clip, but the opposite of the first.
Step3: Bring the two outer ends of the paper clips together.
Twist them to make a kind of handle that you will use to raise the cork.
Step4: Remove the plug.
Get a small spoon, a somewhat sturdy pencil or a screwdriver that you slip under the handle. This done, slide two fingers under the object on each side of the handle, and pull gently. The plug should give way
Method 7: Open a bottle with a hammer
Step1: Collect 3 toothed nails and a hammer.
As for the length of the nails, take some that are about the height of the cap.
Step2: Gently drive the nails into the cork.
Push them in vertically, in line and quite close to each other. When typing, you must absolutely prevent the cork from breaking into small pieces.
Step3: Use the nail puller on your hammer.
Engage the slot of the hammer fully around the nails, the grip should be maximum.
Step4: Lift the cap.
You do not have to rock to remove the cap, you must pull straight up with small sideways movements to facilitate the release of the cap. If it’s more convenient, hold your hammer stationary and pull on the bottle. It’s up to you to decide which technique is most likely to be successful .
- If the operation fails, you could start over one last time, but this time driving the nails in a line perpendicular to the first.
Method 8: Open a bottle with a pair of scissors
Step1: Get a pair of scissors.
It will be assumed that the plug is not fully inserted, otherwise it will not work. The ideal for what we want to do is to recover a pair of not too long scissors (sewing or for children, for example).
Step2: Spread the blades as far as possible.
As you will have to open the two blades as much as possible, be careful not to cut yourself with the wire of one of the two blades.
Step3: Push the thinnest blade into the stopper.
Poke the tip of the blade in the middle of the stopper and gradually press down until halfway down the blade. Be careful not to push the cork into the bottle and not to break it.
Step4: Rotate the pair of scissors.
Hold the bottle firmly with one hand while pulling with the other while rotating the blade and thus the cap. You can also do the opposite: hold the blades stationary and turn the bottle. If your blade is fully seated and you put tension on the stopper, the stopper should eventually come out until you can pull it out by hand.
- Slightly open your pair of scissors. Push the blades into the cap, close them slightly to make a clamp that will allow you to remove the cap.
- If you don’t have pliers, wrap a string around the screw, it will be used to pull the plug.
- These are troubleshooting methods that are more or less successful. If you have the chance, run and buy a corkscrew, it’s not very expensive and so much more practical. Put one permanently in the trunk of your car.
- It is also possible to heat the neck of the bottle so that it expands and thus facilitates the extraction of the cork. Try for example with a hair dryer, but be careful not to set it to too high a temperature: the glass could shatter.
- When using a sharp or prickly instrument, be careful not to injure yourself, especially if you are with your guests at the twentieth bottle!
- Opening a bottle with your teeth is really not a good idea, you could very well have to visit your dentist.
- As soon as you force open for a bottle, there is always the risk that the neck will burst.
- Remember to always tilt your bottle so that if the cork gives way suddenly, you do not get sprayed.
- Depending on the storage conditions of the wine bottle, the cork may very well have dried out and come apart. So be careful not to break your cork.
“So that’s how you know how to open a wine bottle without a corkscrew”
For More Articles Visit: Digital Combination