How to get blood out of carpet? Blood becomes more difficult to clean when it is dry. Carpets should be replaced as soon as possible to increase their chances of giving them a new life without damaging them. The treatments you would recommend are listed from the mildest to the most aggressive. If the blood dries, aggressive treatment may be required, but be aware that the carpet may be damaged or discolored. Be patient and try the gentle Methods:

8 Easy Methods Of How to get blood out of carpet

How to get blood out of carpet

  1. Wipe off excess blood from the carpet.
  2. Dissolve blood stains in lukewarm water
  3. Apply potato starch to the stain
  4. Detergent solution
  5. Use carpet stain remover on bloodstains
  6. Hydrogen peroxide
  7. Used by mixing water and ammonia
  8. Oxiclean

Also Read This Article:

How to get slime out of carpet ? Easy Steps

Wipe Off Excess Blood From The Carpet

If the carpet is new to blood, first wipe the blood off with a dry white cloth or undyed absorbent paper. For example, you can use a kitchen paper towel to gently wipe off the blood stains.

Note: Do not rub as rubbing may increase bloodstaining. Instead, you’re ready to follow the next steps in our guide to cleaning stains and removing blood from your carpet.

continue reading with another trick on how to get blood out of carpet in Method #2 below.

Dissolve Blood Stains In Lukewarm Water

When you want to remove blood from your carpet, the next step is to apply cold water to the bloodstain (without soap, detergent, liquid detergent, or similar detergent). It is important to use cold water to remove blood from carpet, as warm water speeds up blood clotting and makes stain removal more difficult. Gently dab the area with a damp cloth, then wipe with a dry white cloth to absorb as much liquid as possible. continue reading with another trick on how to get blood out of carpet in Method #3 below.

Apply Potato Starch To The Stain

After the blood stains on the carpet have been thawed in lukewarm water, the stain should be sprinkled with potato starch and allowed to dry for 24 hours before vacuuming the carpet.

Often the first three steps in this guide will be sufficient to remove blood from your carpet. However, if you are still not satisfied with the results, continue reading with another trick on how to get blood out of carpet in Method #4 below.

Detergent Solution

  • When the stain dries, gently wipe it with a soft brush to remove any deposits.
  • Mix 1 tablespoon of unscented liquid hand dishwashing liquid and 2 cups of cold water. Using a clean white cloth, wipe the stain with the detergent solution.
  • Wipe until liquid is absorbed. Repeat until the stain is gone, then rinse the stain with cold water and dry it.
  • If the spots remain, mix a tablespoon of ammonia (Note: do not mix chlorine bleach with ammonia; the fumes produced are dangerous) and 1/2 cup of warm water. Wipe the stain with the solution and wipe until the liquid is absorbed. Sponge with cold water and dry. continue reading with another trick on how to get blood out of carpet in Method #5 below.

Used By Mixing Water And Ammonia

How to get blood out of carpet

It can be an effective way to remove bloodstains from carpets, but don’t use ammonia on woolen carpets. Using this method, mix 1-2 teaspoons of ammonia with water and apply the solution on the carpet. Allow the solution to work for 5-10 minutes before wiping the stain with a clean cloth.continue reading with another trick on how to get blood out of carpet in Method #8 below.

Use Carpet Stain Remover On Bloodstains

If the blood stains are not completely removed after the carpet has been dissolved in water and potato starch, the next step is universal stain removal. This is a little harsher on the carpet, so soften it up when trying to remove bloodstains from your carpet with a stain remover. For additional instructions, see the directions for use on the product packaging. Continue reading with another trick on how to get blood out of carpet in Method #6 below.

Hydrogen Peroxide

Instead of relying on reliable pantry cleaners like vinegar and baking soda, head to the drug store when you’re in trouble. Then follow these steps step by step:

  • Advertising – Continue reading below
  • First, test the hydrogen peroxide in a hidden area to make sure the carpet doesn’t change color.
  • If you do not notice a change in color, use a cotton swab moistened with hydrogen peroxide and gently apply to the stain.
  • Rinse with a damp cloth and air dry.

continue reading with another trick on how to get blood out of carpet in Method #7 below.


If you prefer to use a specialized cleaner rather than making your own solution from scratch, OxiClean is your friend. To use, dissolve OxiClean all-purpose stain remover in warm water according to packaging instructions. Wet the stain and let it sit for up to 5 minutes, then wipe it off with a dry cloth. And if you’re dealing with other stains, you can do the same with red wine, coffee and pet waste.


When the tea towel runs out, pat the blood with a paper towel. They will do perfectly well, but can leave an unpleasant residue when wet.

Some people find sparkling water or sparkling water more effective than tap water. Although there is no evidence that this is the case, these treatments pose no risk to the carpet. Be careful not to use beverages that contain sugar.


  • Do not apply anything hot to the bloodstain.
  • Use ammonia in a well-ventilated room. Be careful not to breathe vapors.
  • If you are handling blood other than your own, wear impervious gloves to protect yourself from blood-borne diseases.
  • Do not mix ammonia and bleach as they can produce toxic gases.
  • Do not use circular motions to clean stains. There is a risk of damaging the texture of the treated surface.

Frequently Asked Questions

Can Vinegar Remove Bloodstains?

If you are looking for a natural blood stain remover, pouring white vinegar directly on the stain can help dissolve the stain. Soak in vinegar for 30 minutes, then rinse with cold water and soak a few times in vinegar to completely remove the stain.

How Does Baking Soda Remove Blood From Carpet?

Remove blood from carpet: fresh bloodstains

  • Wipe off excess blood with a paper towel.
  • Sprinkle generous amounts of baking soda on the stain and add a little water.
  • Rub the stain with a cloth until the carpet is completely dry.
  • Use a wet/dry vacuum cleaner to remove excess water.


Thats it!

For More Article Visit: Digital Combination


Please enter your comment!
Please enter your name here